Description

Template for Grandstream ATA HT502 and 503.

Intended Audience

Admin, Reseller, Client

Reference

File pattern: cfg%%mac%%.xml

Template

<?xml version="1.0" encoding="UTF-8" ?>
<gs_provision version="1">
<mac>%%mac%%</mac>
<config version="1">
 
<!-- ############################################################################# -->
<!-- #  Advanced Settings. -->
<!-- ############################################################################# -->
 
<!--  Admin password for web interface -->
<!--  Mandatory; between ascii values 33 and 126 -->
<P2><!-- INSERT YOUR SECRET ADMIN PASSWORD EX.:1234] --></P2>
 
<!--  Layer 3 QoS (IP Diff-Serv or Precedence value for RTP) -->
<!--  Number: 0 to 63 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P38>12</P38>
 
<!--  Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP) -->
<!--  Number: 0 to 4095 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P51>0</P51>
 
<!--  Layer 2 QoS. 802.1p priority value (0 - 7) -->
<!--  Number: 0 to 7 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P87>0</P87>
 
<!--  802.1p priority value (NATed traffic) value (0 - 7) -->
<!--  Number: 0 to 7 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P230>0</P230>
 
<!--  STUN server -->
<!--  Server address -->
<P76>stun.mycompanyp.com</P76>
 
<!--  Keep-alive interval (in seconds. default 20 seconds) -->
<!--  Number: 10 to 160 -->
<!--  Mandatory -->
<P84>20</P84>
 
<!--  Use STUN to detect network connectivity (0 - No, 1 - Yes. default No) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P474>0</P474>
 
<!--  If Yes, total STUN response misses to restart DHCP client(mininum=3, default=5) -->
<!--  Number: 3 to 15 -->
<!--  Mandatory -->
<P475>5</P475>
 
<!-- ------------------------------------------------------------------------------- -->
<!--  Firmware Upgrade -->
<!-- ------------------------------------------------------------------------------- -->
<!--  Firmware Upgrade and Privisioning. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P212>1</P212>
 
<!--  Firmware Server Path -->
<P192>fm.grandstream.com/gs</P192>
 
<!--  Config Server Path -->
<P237>%%realm%%/p</P237>
 
<!--  XML Config File Password -->
<!--  String; between ascii values 33 and 126 -->
<P1359></P1359>
 
<!--  HTTP/HTTPS User Name -->
<!--  String; between ascii values 33 and 126 -->
<P1360>%%prv_username%%</P1360>
<!--  HTTP/HTTPS Password -->
<!--  String; between ascii values 33 and 126 -->
<P1361>%%prv_password%%</P1361>
<!--  Firmware File Prefix -->
<!--  String; between ascii values 33 and 126 -->
<P232></P232>
<!--  Firmware File Postfix -->
<!--  String; between ascii values 33 and 126 -->
<P233></P233>
<!--  Config File Prefix -->
<!--  String; between ascii values 33 and 126 -->
<P234></P234>
<!--  Config File Postfix -->
<!--  String; between ascii values 33 and 126 -->
<P235></P235>
<!--  Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes. -->
<!--  When set to Yes(1), it will override the configured provision path and method. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P145>1</P145>
 
<!--  Automatic Upgrade. 0 - No, 1 - Check daily, 2 - Check weekly, 3 - Check every () minutes. Default is No. -->
<!--  Number: 0, 1, 2, 3 -->
<!--  Mandatory -->
<P194>0</P194>
 
<!--  Check for new firmware/config file every () minutes, unit is in minute, minimum 60 minutes, default is 7 days. P194 = 3 -->
<!--  Number: 60 to 5256000 -->
<!--  Mandatory -->
<P193>10080</P193>
 
<!--  Automatic Upgrade. Daily at hour(0-23). P194 = 1 -->
<!--  Number: 0 to 23 -->
<!--  Mandatory -->
<P285>1</P285>
 
<!--  Automatic Upgrade. Weekly on day (0-6). P194 = 2 -->
<!--  Number: 0 to 6 -->
<!--  Mandatory -->
<P286>1</P286>
 
<!--  Use firmware pre/postfix to determine if f/w is required -->
<!--  0 = Always Check for New Firmware  -->
<!--  1 = Check New Firmware only when F/W pre/suffix changes  -->
<!--  2 = Always Skip the Firmware Check -->
<!--  For Firmware only. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P238>0</P238>
 
<!--  Disable SIP NOTIFY Authentication -->
<!--  Number: 0 No, 1 Yes  (Device will not challenge NOTIFY with 401 when set to Yes)  -->
<!--  Mandatory -->
<P4428>0</P4428>
 
<!--  Authenticate Conf File -->
<!--  Number: 0 No, 1 Yes  (cfg file would be authenticated before acceptance if set to Yes)  -->
<!--  Mandatory -->
<P240>0</P240>
 
<!--  Firmware Key (AES 128, in Hexadecimal Representation)  -->
<!--  Number: 0-9, a-z, A-Z -->
<!--  Mandatory -->
<P242></P242>
<!--  SIP TLS Certificate -->
<!--  String -->
<!-- P280 = -->
 
<!--  SIP TLS Private Key -->
<!--  String -->
<!-- P279 = -->
     
<!--  SIP TLS Private Key Password -->
<!--  String -->
<!--  Max Length: 64 characters -->
<!-- P281 = -->
 
<!--  ACS URL -->
<!-- P4503 = -->
 
<!--  ACS Username -->
<!--  String -->
<P4504></P4504>
<!--  ACS Password -->
<!--  String -->
<P4505></P4505>
<!--  Periodic Inform Enable 0 - No, 1 - Yes (default is No) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4506>0</P4506>
 
<!--  Periodic Inform Interval (default is 300) -->
<!--  Max Length: 5 digits -->
<P4507>300</P4507>
 
<!--  Conncetion Request Username -->
<!--  String -->
<P4511></P4511>
<!--  Connection Request Password -->
<!--  String -->
<P4512></P4512>
<!--  Connection Request Port (default is 7547) -->
<!--  String -->
<!--  Max Length: 5 characters -->
<P4518>7547</P4518>
 
<!--  CPE SSL Certificate -->
<!--  String -->
<P8220></P8220>
<!--  CPE SSL Private Key -->
<!--  String -->
<P8221></P8221>
<!--  System Ring Cadence -->
<!--  String -->
<P4040>c=2000/4000;</P4040>
 
<!-- ------------------------------------------- -->
<!--  Call Progress Tones -->
<!-- ------------------------------------------- -->
<!--  Dial Tone -->
<!--  String -->
<P4000>f1=350@-13,f2=440@-13,c=0/0;</P4000>
 
<!--  Ringback Tone -->
<!--  String -->
<P4001>f1=440@-19,f2=480@-19,c=2000/4000;</P4001>
 
<!--  Busy Tone -->
<!--  String -->
<P4002>f1=480@-24,f2=680@-24,c=500/500;</P4002>
 
<!--  Reorder Tone -->
<!--  String -->
<P4003>f1=480@-24,f2=620@-24,c=250/250;</P4003>
 
<!--  Confirmation Tone -->
<!--  String -->
<P4004>f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;</P4004>
 
<!--  Call Waiting tone -->
<!--  String -->
<P4005>f1=440@-13,c=300/10000-300/10000-0/0;</P4005>
 
<!--  Prompt Tone -->
<!--  String -->
<P4041>f1=350@-13,f2=440@-13,c=0/0;</P4041>
 
<!--  Prompt Tone Access Code(Key pattern to get Prompt Tone. Maximum 20 digits. No default.) -->
<!--  String -->
<P4042></P4042>
 
<!--  Lock keypad update.  0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P88>0</P88>
 
<!--  Disable voice prompt. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P253>0</P253>
 
<!--  Disable Direct IP Call. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P277>0</P277>
 
<!--  Life Line Mode. 0 - Auto, 1 - Always Disconnected, 2 - Always Connected -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P891>0</P891>
 
<!--  NTP Server -->
<!--  Server address -->
<P30>us.pool.ntp.org</P30>
 
<!--  NTP Update Interval in minutes(5-1440)(Default is set to 60 minutes) -->
<!--  Number: 5 to 1440 -->
<!--  Mandatory -->
<P5005>1440</P5005>
 
<!--  Syslog Server (name of the server, max length is 64 characters) -->
<!--  Server address -->
<!--  Reboot required -->
<P207></P207>
 
<!--  Syslog Level (Default setting is NONE) -->
<!--  0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR -->
<!--  Number: 0, 1, 2, 3, 4 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P208>0</P208>
 
<!--  Send SIP Log (0 - No, 1 - Yes, Default set to No) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P1387>0</P1387>
 
<!-- ############################################################################# -->
<!-- #  FXS PORT Settings. -->
<!-- ############################################################################# -->
<!--  Account Active. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P271>1</P271>
 
<!--  Primary SIP Server -->
<!--  Server address -->
<P47>%%realm%%</P47>
 
<!--  Failover SIP Server -->
<!--  Server address -->
<P967></P967>
 
<!--  Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4567>0</P4567>
 
<!--  Outbound Proxy -->
<!--  Server address -->
<P48>%%outbound_proxy_ip%%</P48>
 
<!--  SIP Transport 0 - UDP, 1 - TCP, 2 - TLS -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P130>0</P130>
 
<!--  NAT Traversal (STUN) 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P52>0</P52>
 
<!--  SIP User ID -->
<!--  String -->
<P35>%%username%%</P35>
 
<!--  Authentication ID -->
<!--  String -->
<P36>%%username%%</P36>
 
<!--  Authentication password -->
<!--  String -->
<P34>%%password%%</P34>
 
<!--  Name (John Doe) -->
<!--  String -->
<P3>%%first_name%% %%last_name%%</P3>
 
<!--  DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!--  Number: 0, 1, 2, 3 -->
<!--  Mandatory -->
<P103>0</P103>
 
<!--  Primary IP -->
<!--  IP address -->
<P2308></P2308>
<!--  Backup IP1 -->
<!--  IP address -->
<P2309></P2309>
<!--  Backup IP2 -->
<!--  IP address -->
<P2310></P2310>
<!--  Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P63>0</P63>
 
<!--  SIP Registration. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P31>1</P31>
 
<!--  Unregister On Reboot. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P81>0</P81>
 
<!--  Outgoing call without Registration. 0 - no, 1 - yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P109>1</P109>
 
<!--  Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!--  Number: 1 to 64800 -->
<!--  Mandatory -->
<P32>60</P32>
 
<!--  Reregister before Expiration -->
<!--  Number -->
<!--  Mandatory -->
<P2330>0</P2330>
 
<!--  SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 20) -->
<!--  Number: 1 to 3600 -->
<!--  Mandatory -->
<P138>20</P138>
 
<!--  Local SIP port (default 5060) -->
<!--  Number: 1 to 65535 -->
<!--  Mandatory -->
<P40>%%sip_port%%</P40>
 
<!--  Local RTP port (1024-65535, default 5004) -->
<!--  Number: 1024 to 65535 -->
<!--  Mandatory -->
<P39>5004 </P39>
 
<!--  Use Random Port. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P78>0</P78>
 
<!--  Refer-To Use Target Contact. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P135>0</P135>
 
<!--  Transfer on Conference Hangup. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4560>0</P4560>
 
<!--  Disable Bellcore Style 3-Way Conference. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4830>0</P4830>
 
<!--  Remove OBP from Route Header. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
P4562 =0
 
<!--  Support SIP Instance ID. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P288>1</P288>
 
<!--  Validate Incoming SIP Message. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4340>0</P4340>
 
<!--  Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P258>0</P258>
 
<!--  Allow Incoming SIP Messages from SIP Proxy Only 0 - No, 1 - Yes (nodirect IPcalling if Yes) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P243>0</P243>
 
<!--  SIP T1 Timeout.  -->
<!--  50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 50. -->
<!--  Number: 50, 100, 200, 400, 800 -->
<!--  Mandatory -->
<P209>50</P209>
 
<!--  SIP T2 Interval.  -->
<!--  Value 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!--  Number: 200, 400, 800, 1600, 3200 -->
<!--  Mandatory -->
<P250>400</P250>
 
<!--  DTMF Payload Type -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P79>101</P79>
 
<!--  Preferred DTMF method.  -->
<!--  100 - In-audio, 101 - RFC2833, 102 - SIP INFO -->
<!--  Priority 1 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P850>100</P850>
 
<!--  Priority 2 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P851>100</P851>
 
<!--  Priority 3 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P852>100</P852>
 
<!--  Disable DTMF Negotiation. 0 - No, 1 - Yes  -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4825>0</P4825>
 
<!--  Send Hook Flash Event. 0 - No, 1 - Yes  -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P74>0</P74>
 
<!--  Enable Call Features. 0 - No, 1 - Yes  -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P191>1</P191>
 
<!--  Offhook Auto-Dial (User ID/extension to dial automatically when offhook) -->
<!--  String: 0 to 9, *, # -->
<P71></P71>
<!--  Offhook Auto-Dial Delay (default is 0) -->
<!--  String: 0 to 60 -->
<P4045>0</P4045>
 
<!--  Proxy-Require  -->
<!--  IP Address -->
<P197></P197>
<!--  Use NAT IP (used in SIP/SDP message if specified) -->
<!--  IP Address -->
<P101></P101>
 
<!--  Use SIP User-Agent Header for FXS -->
<!--  String -->
<P4834></P4834>
 
<!--  Distinctive Ring Tone  -->
<!--  0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5,  -->
<!--  5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10 -->
<!--  Distinctive Ring Tone Choice 1 -->
<!--  Number: 0 to 9 -->
<!--  Mandatory -->
<P870>0</P870>
 
<!--  Choice 1 incoming caller ID -->
<!--  String -->
<P871></P871>
 
<!--  Distinctive Ring Tone Choice 2 -->
<!--  Number: 0 to 9 -->
<!--  Mandatory -->
<P872>0</P872>
 
<!--  Choice 2 incoming caller ID -->
<!--  String -->
<P873></P873>
 
<!--  Distinctive Ring Tone Choice 3 -->
<!--  Number: 0 to 9 -->
<!--  Mandatory -->
<P874>0</P874>
 
<!--  Choice 3 incoming caller ID -->
<!--  String -->
<P875></P875>
 
<!--  Disable Call-Waiting. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P91>0</P91>
 
<!--  Disable Call-Waiting Caller ID. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P714>0</P714>
 
<!--  Disable Call-Waiting Tone. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P186>0</P186>
 
<!--  Disable Receiver Offhook Tone. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4793>0</P4793>
 
<!--  Disable Reminder Ring for On-Hold Call. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4360>0</P4360>
 
<!--  Disable Visual MWI. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P855>0</P855>
 
<!--  Ring Timeout. (10-300, default is 60 seconds) -->
<!--  Number: 10 to 300 -->
<!--  Mandatory -->
<P185>60</P185>
 
<!--  Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds. -->
<!--  Number: 1 to 120 -->
<!--  Mandatory -->
<P139>20</P139>
 
<!--  No Key Entry Timeout (in seconds, default is 4 seconds) -->
<!--  Number: 1 to 15 -->
<!--  Mandatory -->
<P85>4</P85>
 
<!--  Early Dial 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P29>0</P29>
 
<!--  Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!--  String -->
<P66></P66>
 
<!--  Use # as Dial Key. 0 - No, 1 - Yes (if set to Yes, "#" will function as the "(Re-)Dial" key) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P72>1</P72>
 
<!--  Dial Plan  -->
<!--  String -->
<P4200>{ x+ | *x+ }</P4200>
 
<!--  SUBSCRIBE for MWI. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P99>0</P99>
 
<!--  Send Anonymous. 0 - No, 1 - Yes  (caller ID will be blocked if set to Yes) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P65>0</P65>
 
<!--  Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P129>0</P129>
 
<!--  Special Feature  -->
<!--  100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - Phone Power, 120 - TELKOM SA. -->
<!--  Number: 100, 102, 108, 109, 111, 114, 119, 120 -->
<!--  Mandatory -->
<P198>100</P198>
 
<!--  Session Expiration (in seconds. default 180 seconds. Allowed value: 90-64800) -->
<!--  Number: 90 to 64800 -->
<!--  Mandatory -->
<P260>180</P260>
 
<!--  Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!--  Number: 90 to 64800 -->
<!--  Mandatory -->
<P261>90</P261>
 
<!--  Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P262>0</P262>
 
<!--  Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P263>0</P263>
 
<!--  Force Timer (Still use timer when remote party does not support timer) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P264>0</P264>
 
<!--  UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P266>0</P266>
 
<!--  UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!--  Number: 1, 2 -->
<!--  Mandatory -->
<P267>1</P267>
 
<!--  Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P265>0</P265>
 
<!--  Send Re-INVITE After Fax. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4367>0</P4367>
 
<!--  Enable Silence Detection for Fax Disconnect. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4406>1</P4406>
 
<!--  Enable 100rel. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P272>0</P272>
 
<!-- ------------------------------------------------------------------------------- -->
<!--  Codec/Voice Quality settings -->
<!-- ------------------------------------------------------------------------------- -->
<!--  Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4363>0</P4363>
 
<!--  Preferred Vocoder -->
<!--  0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, -->
<!--  100 - AAL2-G.726-16, 102 - AAL2-G.726-24, 104 - AAL2-G.726-32, 103 - AAL2-G.726-40,  98 - iLBC, 99 - G.729E -->
<!--  Choice 1. -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P57>0</P57>
 
<!--  Choice 2.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P58>8</P58>
 
<!--  Choice 3.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P59>4</P59>
 
<!--  Choice 4.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P60>18</P60>
 
<!--  Choice 5.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P61>2</P61>
 
<!--  Choice 6.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P62>98</P62>
 
<!--  Choice 7.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P46>103</P46>
 
<!--  Choice 8.  -->
<!--  Number: 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P98>99</P98>
 
<!--  Voice Frames per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!--  Number: 1 to 4 -->
<P37>2</P37>
 
<!--  G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P49>0</P49>
 
<!--  iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P97>0</P97>
 
<!--  iLBC payload type. (between 96 and 127, default is 97). -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P96>97</P96>
 
<!--  AAL2-G726-16 payload type. (between 96 and 127, default is 100) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P125>100</P125>
 
<!--  AAL2-G726-24 payload type. (between 96 and 127, default is 99) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P126>99</P126>
 
<!--  AAL2-G726-32 payload type. (between 96 and 127, default is 104) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P127>104</P127>
 
<!--  AAL2-G726-40 payload type. (between 96 and 127, default is 103) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P128>103</P128>
 
<!--  G729E payload type. (between 96 and 127, default is 102) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P124>102</P124>
 
<!--  VAD. 0 - No, 1 - Yes  -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P50>0</P50>
 
<!--  Symmetric RTP. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P291>0</P291>
 
<!--  FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P228>0</P228>
 
<!--  Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P894>0</P894>
 
<!--  Jitter buffer type.  0 - Fixed, 1 - Adaptive -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P133>1</P133>
 
<!--  Jitter buffer length. 0 - Low, 1 - Medium, 2 - High -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P132>1</P132>
 
<!--  SRTP Mode -->
<!--  0 = Disabled -->
<!--  1 = Enabled but not forced -->
<!--  2 = Enabled and forced -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P183>0</P183>
 
<!-- -------------------------------------------------------------------------- -->
<!--  SLIC Setting.    -->
<!--  0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINLAND, 4 - FRANCE, 5 - GERMANY -->
<!--  6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN, -->
<!--  12 - UK, 13 - AUSTRALIA/NEW ZEALAND, 14 - CHINA -->
<!--  Number: 0 to 14 -->
<!--  Mandatory -->
<P854>0</P854>
 
<!--  Caller ID Scheme.   -->
<!--  <value=0> Bellcore/Telcordia (default) -->
<!--  <value=1> ETSI-FSK during ringing  -->
<!--  <value=2> ETSI-FSK prior to ringing with DTAS -->
<!--  <value=3> ETSI-FSK prior to ringing with LR -->
<!--  <value=4> ETSI-FSK prior to ringing with RP -->
<!--  <value=5> ETSI-DTMF during ringing -->
<!--  <value=6> ETSI-DTMF prior to ringing with DTAS -->
<!--  <value=7> ETSI-DTMF prior to ringing with LR -->
<!--  <value=8> ETSI-DTMF prior to ringing with RP -->
<!--  <value=9> SIN 227 - BT -->
<!--  <value=10> NTT Japan  -->
<!--  Number: 0 to 10 -->
<!--  Mandatory -->
<P853>0</P853>
 
<!--  Caller ID Tx Level (-40 - 0dB. Default -20dB) -->
<!--  Range: -40 to 0 -->
<!--  Mandatory -->
<P844>-20</P844>
 
<!--  Polarity Reversal.  0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P205>0</P205>
 
<!--  Loop Current Disconnect. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P892>0</P892>
 
<!--  Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200. -->
<!--  Number: 100 to 10000 -->
<!--  Mandatory -->
<P856>200</P856>
 
<!--  Enable Hook Flash -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4424>1</P4424>
 
<!--  Hook Flash Timing. In 40-2000 milliseconds range -->
<!--  minimum -->
<!--  Number: 40 to 2000 -->
<!--  Mandatory -->
<P251>300</P251>
 
<!--  maximum -->
<!--  Number: 40 to 2000 -->
<!--  Mandatory -->
<P252>1100</P252>
 
<!--  On Hook Timing. (In 40-2000 milliseconds range, default is 400) -->
<!--  Number: 40 to 2000 -->
<!--  Mandatory -->
<P833>400</P833>
 
<!--  Gain: -->
<!--  TX  -->
<!--  <value=1> +6dB -->
<!--  <value=2> +4dB -->
<!--  <value=3> +2dB -->
<!--  <value=0> 0dB -->
<!--  <value=4> -2dB -->
<!--  <value=5> -4dB -->
<!--  <value=6> -6dB -->
<!--  Number: 0, 1, 2, 3, 4, 5, 6 -->
<!--  Mandatory -->
<P247>0 </P247>
 
<!--  RX  -->
<!--  <value=1> +6dB -->
<!--  <value=2> +4dB -->
<!--  <value=3> +2dB -->
<!--  <value=0> 0dB -->
<!--  <value=4> -2dB -->
<!--  <value=5> -4dB -->
<!--  <value=6> -6dB -->
<!--  Number: 0, 1, 2, 3, 4, 5, 6 -->
<!--  Mandatory -->
<P249>0</P249>
 
<!--  Disable Line Echo Canceller (LEC).  0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P824>0</P824>
 
<!--  Ring Tone 1 -->
<!--  String -->
<P4010>c=2000/4000;</P4010>
 
<!--  Ring Tone 2 -->
<!--  String -->
<P4011>c=2000/4000;</P4011>
 
<!--  Ring Tone 3 -->
<!--  String -->
<P4012>c=2000/4000;</P4012>
 
<!--  Ring Tone 4 -->
<!--  String -->
<P4013>c=2000/4000;</P4013>
 
<!--  Ring Tone 5 -->
<!--  String -->
<P4014>c=2000/4000;</P4014>
 
<!--  Ring Tone 6 -->
<!--  String -->
<P4015>c=2000/4000;</P4015>
 
<!--  Ring Tone 7 -->
<!--  String -->
<P4016>c=2000/4000;</P4016>
 
<!--  Ring Tone 8 -->
<!--  String -->
<P4017>c=2000/4000;</P4017>
 
<!--  Ring Tone 9 -->
<!--  String -->
<P4018>c=2000/4000;</P4018>
 
<!--  Ring Tone 10 -->
<!--  String -->
<P4019>c=2000/4000;</P4019>
 
<!-- ############################################################################# -->
<!-- #  FXO PORT Settings. -->
<!-- ############################################################################# -->
<!--  Account Active. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P401>1</P401>
 
<!--  Primary SIP Server -->
<!--  Server address -->
<P747>sip.mycompany.com</P747>
 
<!--  Failover SIP Server -->
<!--  Server address -->
<P987></P987>
 
<!--  Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4568>0</P4568>
 
<!--  Outbound Proxy -->
<!--  Server address -->
<P748>proxy.mycompany.com</P748>
 
<!--  SIP Transport 0 - UDP, 1 - TCP, 2 - TLS -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P830>0</P830>
 
<!--  NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P730>0</P730>
 
<!--  SIP User ID -->
<!--  String -->
<P735></P735>
 
<!--  Authentication ID -->
<!--  String -->
<P736></P736>
 
<!--  Authentication password -->
<!--  String -->
<P734></P734>
 
<!--  Name (John Doe) -->
<!--  String -->
<P703></P703>
 
<!--  DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!--  Number: 0, 1, 2, 3 -->
<!--  Mandatory -->
<P702>0</P702>
 
<!--  Primary IP -->
<!--  IP address -->
<P2408></P2408>
<!--  Backup IP1 -->
<!--  IP address -->
<P2409></P2409>
<!--  Backup IP2 -->
<!--  IP address -->
<P2410></P2410>
 
<!--  Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P763>0</P763>
 
<!--  SIP Registration. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P731>1</P731>
 
<!--  Unregister On Reboot. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P752>0</P752>
 
<!--  Outgoing call without Registration. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P813>1</P813>
 
<!--  Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!--  Number: 1 to 64800 -->
<!--  Mandatory -->
<P732>60</P732>
 
<!--  Reregister before Expiration -->
<!--  Number -->
<!--  Mandatory -->
<P2430>0</P2430>
 
<!--  SIP Registration Failure Retry Wait Time -->
<!--  Number: 1 to 3600 -->
<!--  Mandatory -->
<P471>20</P471>
 
<!--  Local SIP port (default 5062) -->
<!--  Number: 1 to 65535 -->
<!--  Mandatory -->
<P740>5062</P740>
 
<!--  Local RTP port (1024-65535, default 5012) -->
<!--  Number: 1024 to 65535 -->
<!--  Mandatory -->
<P739>5012</P739>
 
<!--  Use Random Port. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P778>0</P778>
 
<!--  Remove OBP from Route Header. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4563>0</P4563>
 
<!--  Support SIP Instance ID. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P489>1</P489>
 
<!--  Validate Incoming SIP Message. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4341>0</P4341>
 
<!--  Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P449>0</P449>
 
<!--  Allow Incoming SIP Messages from SIP Proxy Only 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P743>0</P743>
 
<!--  SIP T1 Timeout.  -->
<!--  50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 50. -->
<!--  Number: 50, 100, 200, 400, 800 -->
<!--  Mandatory -->
<P440>50</P440>
 
<!--  SIP T2 Interval.  -->
<!--  200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!--  Number: 200, 400, 800, 1600, 3200 -->
<!--  Mandatory -->
<P441>400</P441>
 
<!--  DTMF Payload Type -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P779>101</P779>
 
<!--  Preferred DTMF method. 100 - In-Audio, 101 - RFC2833, 102 - SIP INFO -->
<!--  Priority 1 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P860>100</P860>
 
<!--  Priority 2 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P861>100</P861>
 
<!--  Priority 3 -->
<!--  Number: 100, 101, 102 -->
<!--  Mandatory -->
<P862>100</P862>
 
<!--  Disable DTMF Negotiation. 0 - No (default, negotiate with peer), 1 - Yes (use above DTMF order without negotiation) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4826>0</P4826>
 
<!--  Proxy-Require  -->
<!--  IP Address -->
<P792></P792>
<!--  Use NAT IP (used in SIP/SDP message if specified) -->
<!--  IP Address -->
<P866></P866>
 
<!--  Use SIP User-Agent Header for FXO -->
<!--  String -->
<P4835></P4835>
 
<!--  Ring Timeout. (10-300, default is 60 seconds) -->
<!--  Number: 10 to 300 -->
<!--  Mandatory -->
<P816>60</P816>
 
<!--  Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P729>0</P729>
 
<!--  Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!--  String -->
<P766></P766>
 
<!--  Use # as Dial Key. 0 - No, 1 - Yes (if set to Yes, "#" will function as the "(Re-)Dial" key) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P772>1</P772>
 
<!--  Dial Plan  -->
<!--  String -->
<P4201>{ x+ | *x+ }</P4201>
 
<!--  SUBSCRIBE for MWI. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P709>0</P709>
 
<!--  Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P446>0</P446>
 
<!--  Special Feature  -->
<!--  100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower. -->
<!--  Number: 100, 102, 108, 109, 111, 114, 119 -->
<!--  Mandatory -->
<P767>100</P767>
 
<!--  Session Expiration (in seconds. default 180 seconds. Allowed value: 90-64800) -->
<!--  Number: 90 to 64800 -->
<!--  Mandatory -->
<P434>180</P434>
 
<!--  Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!--  Number: 90 to 64800 -->
<!--  Mandatory -->
<P427>90</P427>
 
<!--  Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P428>0</P428>
 
<!--  Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P429>0</P429>
 
<!--  Force Timer (Still use timer when remote party does not support timer) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P430>0</P430>
 
<!--  Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P431>0</P431>
 
<!--  UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P432>0</P432>
 
<!--  UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!--  Number: 1, 2 -->
<!--  Mandatory -->
<P433>1</P433>
 
<!--  INVITE Ring-No-Answer Timeout(sec). 5-300 seconds. Default 40 seconds. -->
<!--  Number: 5 to 300 -->
<!--  Mandatory -->
<P848>40</P848>
 
<!--  Enable 100rel. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P435>0</P435>
 
<!-- ------------------------------------------------------------------------------- -->
<!--  Codec/Voice Quality settings -->
<!-- ------------------------------------------------------------------------------- -->
<!--  Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P4364>0</P4364>
 
<!--  Preferred Vocoder -->
<!--  0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, -->
<!--  102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 99 - G.729E -->
<!--  Choice 1. -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory  -->
<P757>0</P757>
 
<!--  Choice 2.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P758>8</P758>
 
<!--  Choice 3. -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P759>4</P759>
 
<!--  Choice 4.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P760>18</P760>
 
<!--  Choice 5.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P761>2</P761>
 
<!--  Choice 6.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P762>98</P762>
 
<!--  Choice 7.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P814>103</P814>
 
<!--  Choice 8.  -->
<!--  Number: 0, 2, 4, 8, 18, 98, 99, 100, 102, 103, 104 -->
<!--  Mandatory -->
<P815>99</P815>
 
<!--  Voice Frames per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!--  Number: 1, 2, 3, 4 -->
<P737>2</P737>
 
<!--  G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P749>0</P749>
 
<!--  iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P705>0</P705>
 
<!--  iLBC payload type. (between 96 and 127, default is 97). -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P704>97</P704>
 
<!--  AAL2-G726-16 payload type. (between 96 and 127, default is 100) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P819>100</P819>
 
<!--  AAL2-G726-24 payload type. (between 96 and 127, default is 99) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory  -->
<P820>99</P820>
 
<!--  AAL2-G726-32 payload type. (between 96 and 127, default is 104) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P821>104</P821>
 
<!--  AAL2-G726-40 payload type. (between 96 and 127, default is 103) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P822>103</P822>
 
<!--  G729E payload type. (between 96 and 127, default is 102) -->
<!--  Number: 96 to 127 -->
<!--  Mandatory -->
<P818>102</P818>
 
<!--  VAD. 0 - No, 1 - Yes  -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P750>0</P750>
 
<!--  Symmetric RTP. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P460>0</P460>
 
<!--  FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P710>0</P710>
 
<!--  Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P895>0</P895>
 
<!--  Jitter buffer type.  0 - Fixed, 1 - Adaptive -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P831>1</P831>
 
<!--  Jitter buffer length. 0 - Low, 1 - Medium, 2 - High -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P832>1</P832>
 
<!--  SRTP Mode -->
<!--  0 = Disabled -->
<!--  1 = Enabled but not forced -->
<!--  2 = Enabled and forced -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P443>0</P443>
 
<!--  Caller ID Scheme.   -->
<!--  <value=0> Bellcore/Telcordia (default) -->
<!--  <value=1> ETSI-FSK during ringing  -->
<!--  <value=2> ETSI-FSK prior to ringing with DTAS -->
<!--  <value=3> ETSI-FSK prior to ringing with LR -->
<!--  <value=4> ETSI-FSK prior to ringing with RP -->
<!--  <value=5> ETSI-DTMF during ringing -->
<!--  <value=6> ETSI-DTMF prior to ringing with DTAS -->
<!--  <value=7> ETSI-DTMF prior to ringing with LR -->
<!--  <value=8> ETSI-DTMF prior to ringing with RP -->
<!--  <value=9> SIN 227 - BT -->
<!--  <value=10> NTT Japan  -->
<!--  Number: 0 to 10 -->
<!--  Mandatory -->
<P863>0</P863>
 
<!--  FSK Caller ID Minimum RX Level. (-96 - 0dB. Default -40dB) -->
<!--  Range: -96 to 0 -->
<!--  Mandatory -->
<P845>-40</P845>
 
<!--  FSK Caller ID Seizure Bits. 0 - 800 bits. Default 70. -->
<!--  Number: 0 to 800 -->
<!--  Mandatory -->
<P846>70</P846>
 
<!--  FSK Caller ID Mark Bits. 1 - 800 bits. Default 40. -->
<!--  Number: 1 to 800 -->
<!--  Mandatory -->
<P847>40</P847>
 
<!--  Caller ID Transport Type. 0 = Relay via SIP From, 1 = Relay via SIP P-Asserted-Identity, 2 = Send Anonymous, 3 = Disable -->
<!--  Number: 0, 1, 2, 3 -->
<!--  Mandatory -->
<P839>0</P839>
 
<!--  Send Hook Flash To PSTN (If Yes, hook flash will be sent to PSTN upon receiving flash event from RFC2833 or SIP INFO). 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P837>0 </P837>
 
<!--  Hook Flash Duration (ms). In 300-1500 milliseconds range.minimum = 300, maximum = 1500, default = 600 -->
<!--  Number: 300 to 1500 -->
<!--  Mandatory -->
<P838>600</P838>
 
<!--  Gain: -->
<!--  TX  -->
<!--  <value=1> +6dB -->
<!--  <value=2> +4dB -->
<!--  <value=3> +2dB -->
<!--  <value=0> 0dB -->
<!--  <value=4> -2dB -->
<!--  <value=5> -4dB -->
<!--  <value=6> -6dB -->
<!--  Number: 0, 1, 2, 3, 4, 5, 6 -->
<!--  Mandatory -->
<P248>0 </P248>
 
<!--  RX  -->
<!--  <value=1> +6dB -->
<!--  <value=2> +4dB -->
<!--  <value=3> +2dB -->
<!--  <value=0> 0dB -->
<!--  <value=4> -2dB -->
<!--  <value=5> -4dB -->
<!--  <value=6> -6dB -->
<!--  Number: 0, 1, 2, 3, 4, 5, 6 -->
<!--  Mandatory -->
<P283>0</P283>
 
<!--  Disable Line Echo Canceller (LEC).  0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P825>0</P825>
 
<!--  FXO Termination Settings -->
<!--  Enable Current Disconnect 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P893>1</P893>
 
<!--  Current Disconnect Threshold (50 - 800 milliseconds. Default 100 milliseconds) -->
<!--  Number: 50 to 800 -->
<!--  Mandatory -->
<P764>100</P764>
 
<!--  Enable PSTN Disconnect Tone Detection 0 - No, 1 - Yes (If set to yes, the following Tone is used as the disconnect signal) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P712>0</P712>
 
<!--  PSTN Disconnect Tone  -->
<!--  String -->
<P841>f1=480@-24,f2=620@-24,c=500/500;</P841>
 
<!--  AC Termination Model. 0 - Country Based, 1 - Impedance Based -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P899>0</P899>
 
<!--  Country Based -->
<!-- 0 - USA, 1 - Austria, 2 - Belgium, 3 - Finland, 4 - France, 5 - Germany, 6 - Greece, 7 - Italy -->
<!-- 8 - Japan, 9 - Norway, 10 - Spain, 11 - Sweeden, 12 - UK, 13 - Australia/New Zeeland, 14 - China  -->
<!--  Number: 0 to 14 -->
<!--  Mandatory -->
<P864>0</P864>
 
<!--  Impedance Based -->
<!-- 30 - 600R -- 600 ohms -->
<!-- 31 - 600C -- 600 ohms + 2.16uF -->
<!-- 32 - 900R -- 900 ohms -->
<!-- 33 - 900C -- 900 ohms + 2.16uF -->
<!-- 34 - COMPLEX1 -- 220 ohms + (820 ohms || 115nF) -->
<!-- 35 - COMPLEX2 -- 270 ohms + (750 ohms || 150nF) -->
<!-- 36 - COMPLEX3 -- 370 ohms + (620 ohms || 310nF) -->
<!-- 37 - COMPLEX4 -- 600R, 270 ohms + (750 ohms || 150nF) -->
<!-- 38 - COMPLEX5 -- 320 ohms + (1050 ohms || 230nF) -->
<!-- 39 - COMPLEX6 -- 350 ohms + (1000 ohms || 210nF) -->
<!-- 40 - COMPLEX7 -- 200 ohms + (680 ohms || 100nF) -->
<!-- 41 - COMPLEX8 -- 370 ohms + (820 ohms || 110nF) -->
<!-- 42 - COMPLEX9 -- 275 ohms + (780 ohms || 115nF) -->
<!-- 43 - COMPLEX10 -- 120 ohms + (820 ohms || 110nF) -->
<!--  Number: 30 to 43 -->
<!--  Mandatory -->
<P84></P84>
 
<!--  Number of Rings. (1-10sec, Default 4) -->
<!--  Number: 1 to 10 -->
<!--  Mandatory -->
<P798>4</P798>
 
<!--  PSTN Ring Thru FXS. 0-No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P842>1</P842>
 
<!--  PSTN Ring Thru Delay   (1-10sec, Default 4) -->
<!--  Number: 1 to 10 -->
<!--  Mandatory -->
<P843>4</P843>
 
<!-- ------------------------------------------------------------------------------- -->
<!--  Channel Dialing -->
<!-- ------------------------------------------------------------------------------- -->
<!--  DTMF Digit Length (40-127 milliseconds, Default 100 milliseconds) -->
<!--  Number: 40 to 127 -->
<!--  Mandatory -->
<P3300>100</P3300>
 
<!--  DTMF Dial Pause (40-127 milliseconds, Default 100 milliseconds) -->
<!--  Number: 40 to 127 -->
<!--  Mandatory -->
<P3302>100</P3302>
 
<!--  First Digit Timeout (1-20 sec., Default 10 seconds) -->
<!--  Number: 1 to 20 -->
<!--  Mandatory -->
<P840>10</P840>
 
<!--  Inter-Digit Timeout (1-15 sec., Default 4 seconds) -->
<!--  Number: 1 to 15 -->
<!--  Mandatory -->
<P292>4</P292>
 
<!--  Wait for Dial-Tone. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P3303>1</P3303>
 
<!--  Stage Method. 1 - One stage dialing, 2 - Two stage dialing -->
<!--  Number: 1, 2 -->
<!--  Mandatory -->
<P3304>2</P3304>
 
<!-- ############################################################################# -->
<!-- #  Basic Settings. -->
<!-- ############################################################################# -->
<!--  End User Password -->
<!--  String -->
<!-- P196 = 123 -->
 
<!--  Web Port. Default HTTP is 80. -->
<!--  Number: 1 to 65535 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P901>80</P901>
 
<!--  Telnet Server. 1 - No, 0 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P276>0</P276>
 
<!--  IP Address. 0 - DHCP, 2 - PPPoE, 1 - Static IP  -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P8>0</P8>
 
<!-- ----------------------------------------------- -->
<!--  DHCP -->
<!--  DHCP Hostname, DHCP option 12. Max length allowed is 32 bytes. -->
<!--  Reboot required -->
<P146></P146>
 
<!--  DHCP Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes. -->
<!--  Reboot required -->
<P148>HT500</P148>
 
<!-- ----------------------------------------------- -->
<!--  PPPoE -->
<!--  PPPoE account ID -->
<!--  String -->
<!--  Reboot required -->
<!-- P82 = -->
 
<!--  PPPoE password -->
<!--  String -->
<!--  Reboot required -->
<!-- P83 = -->
 
<!--  PPPoE Service Name -->
<!--  String -->
<!--  Reboot required -->
<!-- P269 =  -->
 
<!--  Preferred DNS server -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P92 = 0 -->
<!-- P93 = 0 -->
<!-- P94 = 0 -->
<!-- P95 = 0 -->
 
<!-- ----------------------------------------------- -->
<!--  Static IP -->
<!--  IP Address. Ignore if DHCP or PPPoE is used -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P9 = 192 -->
<!-- P10 = 168 -->
<!-- P11 = 0 -->
<!-- P12 = 160 -->
 
<!--  Subnet mask. Ignore if DHCP or PPPoE is used -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P13 = 255 -->
<!-- P14 = 255 -->
<!-- P15 = 255 -->
<!-- P16 = 0 -->
 
<!--  Router. Ignore if DHCP or PPPoE is used -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P17 = 0 -->
<!-- P18 = 0 -->
<!-- P19 = 0 -->
<!-- P20 = 0 -->
 
<!--  DNS 1. Ignore if DHCP or PPPoE is used -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P21 = 0 -->
<!-- P22 = 0 -->
<!-- P23 = 0 -->
<!-- P24 = 0 -->
 
<!--  DNS 2. Ignore if DHCP or PPPoE is used -->
<!--  Number: 0 to 255 -->
<!--  Reboot required -->
<!-- P25 = 0 -->
<!-- P26 = 0 -->
<!-- P27 = 0 -->
<!-- P28 = 0 -->
 
<!-- ---------------------------------------------------------- -->
<!-- Time Zone. Offset in minutes to GMT -->
<!--  <value=TZA+12> GMT-12:00 (International Date Line West) -->
<!--  <value=TZB+11> GMT-11:00 (Midway Island, Samoa) -->
<!--  <value=HAW10> GMT-10:00 (US Hawaiian Time) -->
<!--  <value=AKST9AKDT> GMT-09:00 (US Alaska Time) -->
<!--  <value=PST8PDT> GMT-08:00 (US Pacific Time, Los Angeles) -->
<!--  <value=PST8PDT,M4.1.0,M10.5.0> GMT-08:00 (Baja California) -->
<!--  <value=MST7MDT> GMT-07:00 (US Mountain Time, Denver) -->
<!--  <value=MST7> GMT-07:00 (Mountain Time (Arizona, no DST)) -->
<!--  <value=MST7MDT,M4.1.0,M10.5.0> GMT-07:00 (Chihuahua, La Paz, Mazatlan) -->
<!--  <value=CST6CDT> GMT-06:00 (Central Time) -->
<!--  <value=CST+6> GMT-06:00 (Central America) -->
<!--  <value=CST6CDT,M4.1.0,M10.5.0> GMT-06:00 (Guadalajara, Mexico City, Monterrey) -->
<!--  <value=EST5EDT> GMT-05:00 (Eastern Time) -->
<!--  <value=EST5> GMT-05:00 (Eastern Time without daylight saving) -->
<!--  <value=TZf+4:30> GMT-04:30 (Caracas) -->
<!--  <value=AST4ADT> GMT-04:00 (Atlantic Time) -->
<!--  <value=AST4ADT,M4.1.0/00:01:00,M10.5.0/00:01:00> GMT-04:00 (Atlantic Time (New Brunswick)) -->
<!--  <value=NST+3:30NDT+2:30,M4.1.0/00:01:00,M10.5.0/00:01:00> GMT-03:30 (Newfoundland Time) -->
<!--  <value=TZK+3> GMT-03:00 (Greenland) -->
<!--  <value=BRST+3BRDT+2,M10.3.0,M2.3.0> GMT-03:00 (Brazil, Sao Paulo) -->
<!--  <value=UTC+3> GMT-02:00 (Argentina) -->
<!--  <value=TZL+2> GMT-02:00 (Mid-Atlantic) -->
<!--  <value=TZM+1> GMT-01:00 (Azores, Cape Verde Is.) -->
<!--  <value=TZN+0> GMT (Edinburgh, Casablanca, Monrovia) -->
<!--  <value=GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (London, Great Britain) -->
<!--  <value=WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (Lisbon, Portugal) -->
<!--  <value=GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00> GMT (Dublin, Ireland) -->
<!--  <value=TZO-1> GMT+01:00 (Paris, Vienna, Warsaw) -->
<!--  <value=CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00> GMT+01:00 (Roma, Paris, Madrid, Prague, Berlin, Budapest, Amsterdam, Barcelona) -->
<!--  <value=TZO-1> GMT+01:00 (Brussels, Belgium) -->
<!--  <value=TZP-2> GMT+02:00 (Israel, Cairo, Athens, Istanbul, Bucharest) -->
<!--  <value=EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00> GMT+02:00 (Helsinki, Athens, Tallinn) -->
<!--  <value=EET-2EEST,M3.5.0/3,M10.5.0/4> GMT+02:00 (Kyiv, Ukraine) -->
<!--  <value=TZQ-3> GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi) -->
<!--  <value=MSK-3MSD,M3.5.0/2,M10.5.0/3> GMT+03:00 (Moscow, Russia) -->
<!--  <value=MST-3MDT,M3.5.0/2,M10.5.0/3> GMT+03:00 (St.Petersburg, Russia) -->
<!--  <value=TZR-4> GMT+04:00 (Abu Dhabi, Baku) -->
<!--  <value=TZS-5> GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent) -->
<!--  <value=TZT-5:30> GMT+05:30 (Chennai, New Delhi, Mumbai) -->
<!--  <value=TZU-5:45> GMT+05:45 (Kathmandu) -->
<!--  <value=TZV-6> GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk) -->
<!--  <value=TZW-6:30> GMT+06:30 (Rangoon) -->
<!--  <value=TZX-7> GMT+07:00 (Bankok, Hanoi, Krasnoyarsk) -->
<!--  <value=WIB-7> GMT+07:00 (Jakarta) -->
<!--  <value=TZY-8> GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk) -->
<!--  <value=SGT-8> GMT+08:00 (Singapore) -->
<!--  <value=ULAT-8> GMT+08:00 (Ulaanbaatar, Mongolia) -->
<!--  <value=WST-8> GMT+08:00 (Perth) -->
<!--  <value=TZZ-9> GMT+09:00 (Japan, Korea, Yakutsk) -->
<!--  <value=CST-9:30CDT-10:30,M10.5.0/02:00:00,M3.5.0/03:00:00> GMT+09:30 (Adelaide) -->
<!--  <value=CST-9:30> GMT+09:30 (Darwin) -->
<!--  <value=TZb-10> GMT+10:00 (Guam) -->
<!--  <value=EST-10EDT-11,M10.1.0/02:00:00,M3.5.0/03:00:00> GMT+10:00 (Hobart) -->
<!--  <value=EST-10EDT-11,M10.5.0/02:00:00,M3.5.0/03:00:00> GMT+10:00 (Sydney, Melbourne, Canberra) -->
<!--  <value=EST-10> GMT+10:00 (Brisbane) -->
<!--  <value=TZc-11> GMT+11:00 (Magadan, Solomon Is., New Caledonia) -->
<!--  <value=NZST-12NZDT-13,M10.1.0/02:00:00,M3.3.0/03:00:00> GMT+12:00 (Auckland, Wellington) -->
<!--  <value=TZd-12> GMT+12:00 (Fiji) -->
<!--  <value=TZe-13> GMT+13:00 (Nuku'alofa) -->
<!--  <value=customize> Using self-defined Time Zone -->
<!--  Number: a-z, A-Z, ;, + -->
<!--  Mandatory -->
<!--  Reboot required -->
<P64>customize</P64>
 
<!--  Self-Defined Time Zone -->
<!--  Number: a-z, A-Z, ;, + -->
<!--  Mandatory -->
<!--  Reboot required -->
<P246>MTZ+6MDT+5,M3.2.0,M11.1.0</P246>
 
<!--  Language. 0 - English, 4 - Chinese, 10 - Spanish IVR -->
<!--  Number: 0, 4, 10 -->
<!--  Mandatory -->
<P342>0</P342>
 
<!-- ----------------------------------------------- -->
<!--  NAT/DHCP Server Information & Configuration -->
<!-- ----------------------------------------------- -->
<!--  Device Mode. 0 -NAT Router, 1 - Bridge -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P231>1</P231>
 
<!--  NAT maximum ports. range: 0 - 4096, default is 1024 -->
<!--  Number: 0 to 4096 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P896>1024</P896>
 
<!--  NAT TCP timeout. range: 0 - 3600, default is 3600 -->
<!--  Number: 0 to 3600 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P897>3600</P897>
 
<!--  NAT UDP timeout. range: 0 - 3600, default is 300 -->
<!--  Number: 0 to 3600 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P898>300</P898>
 
<!--  Uplink bandwidth.  -->
<!-- <value=0> Disabled -->
<!-- <value=2> 128k -->
<!-- <value=3> 256k -->
<!-- <value=4> 512k -->
<!-- <value=5> 1M -->
<!-- <value=8> 2M -->
<!-- <value=9> 3M -->
<!-- <value=6> 4M -->
<!-- <value=10> 5M -->
<!-- <value=7> 10M -->
<!-- <value=11> 15M -->
<!--  Number: 0, 2 to 11 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P867>0</P867>
 
<!--  Downlink bandwidth. -->
<!-- <value=0> Disabled -->
<!-- <value=2> 128k -->
<!-- <value=3> 256k -->
<!-- <value=4> 512k -->
<!-- <value=5> 1M -->
<!-- <value=8> 2M -->
<!-- <value=9> 3M -->
<!-- <value=6> 4M -->
<!-- <value=10> 5M -->
<!-- <value=7> 10M -->
<!-- <value=11> 15M -->
<!--  Number: 0, 2 to 11 -->
<!--  Mandatory -->
<!--  Reboot required -->
<P868>0</P868>
 
<!--  Enable UPnP support. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P890>0</P890>
 
<!--  Reply to ICMP on WAN port. 0 - No, 1 - Yes (Unit will not respond to PING from WAN side if set to No) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P189>0</P189>
 
<!--  WAN side HTTP/Telnet access. 0 - No, 1 - Yes (WAN side access will be rejected if set to No) -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P190>0</P190>
 
<!--  Cloned WAN MAC Addr (in hex format) -->
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P115></P115>
 
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P116></P116>
 
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P117></P117>
 
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P118></P118>
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P119></P119>
<!--  String: 00 to ff -->
<!--  Reboot required -->
<P120></P120>
<!--  Enable LAN DHCP. 0 - No, 1 - Yes -->
<!--  Number: 0, 1 -->
<!--  Mandatory -->
<P5001>1</P5001>
 
<!--  LAN DHCP Base IP. (base IP for the LAN port, default is 192.168.2.1) -->
<!--  Reboot required -->
<!-- P111 = 192.168.2.1 -->
 
<!--  LAN DHCP Start IP. (default is 100)  -->
<!--  Number: 0 to 255 -->
<!--  Mandatory -->
<P5002>100</P5002>
 
<!--  LAN DHCP End IP. (default is 199) -->
<!--  Number: 0 to 255 -->
<!--  Mandatory -->
<P5003>199</P5003>
 
<!--  LAN Subnet Mask (default is 255.255.255.0) -->
<!--  Mandatory -->
<!--  Reboot required -->
<P110>255.255.255.0</P110>
 
<!--  DHCP IP Lease Time. (in units of hours, default is 120 hours or 5 days) -->
<!--  Mandatory -->
<P112>120</P112>
 
<!--  DMZ IP -->
<!--  IP Address -->
<P113></P113>
 
<!-- ----------------------------------------------------------- -->
<!--  Port Forwarding Settings. -->
<!-- ----------------------------------------------------------- -->
<!-- ############  Choice 1 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P150></P150>
<!--  LAN IP -->
<!--  IP Address -->
<P158></P158>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P166></P166>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P174></P174>
<!-- ############  Choice 2 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P151></P151>
<!--  LAN IP -->
<!--  IP Address -->
<P159></P159>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P167></P167>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P175></P175>
<!-- ############  Choice 3 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P152></P152>
<!--  LAN IP -->
<!--  IP Address -->
<P160></P160>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P168></P168>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P176></P176>
<!-- ############  Choice 4 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P153></P153>
<!--  LAN IP -->
<!--  IP Address -->
<P161></P161>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P169></P169>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P177></P177>
<!-- ############  Choice 5 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P154></P154>
<!--  LAN IP -->
<!--  IP Address -->
<P162></P162>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P170></P170>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P178></P178>
<!-- ############  Choice 6 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P155></P155>
<!--  LAN IP -->
<!--  IP Address -->
<P163></P163>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P171></P171>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P179></P179>
<!-- ############  Choice 7 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P156></P156>
<!--  LAN IP -->
<!--  IP Address -->
<P164></P164>
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P172></P172>
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P180></P180>
<!-- ############  Choice 8 #################################### -->
<!--  WAN Port -->
<!--  Number: 1 to 65535 -->
<P157></P157>
 
<!--  LAN IP -->
<!--  IP Address -->
<P165></P165>
 
<!--  LAN Port -->
<!--  Number: 1 to 65535 -->
<P173></P173>
 
<!--  Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP. -->
<!--  Number: 0, 1, 2 -->
<!--  Mandatory -->
<P181></P181>
 
<!-- -------------------------------------------------- -->
<!--  PSTN Access Code (Default value *00) -->
<!--  String -->
<P195>*00</P195>
 
<!--  PIN for VoIP-To-PSTN calls (maximum 8 digits) -->
<!--  String -->
<P794></P794>
 
<!--  PIN for PSTN-To-VOIP calls (maximum 8 digits) -->
<!--  String -->
<P795></P795>
 
<!--  Unconditional Call forward to PSTN (VoIP calls will be forwarded to the specified PSTN number) -->
<!--  String -->
<P796></P796>
 
<!--  Unconditional call forward to VoIP -->
<!--  SIP User ID -->
<!--  String -->
<P3305></P3305>
 
<!--  SIP Server -->
<!--  Server address -->
<P3306></P3306>
 
<!--  SIP Destination Port -->
<!--  Number: 1 to 65535 -->
<P3307>5060</P3307>
</config>
</gs_provision>